manualshive.com logo in svg

Bosch Security Escort SE2000 Series, Training Manual, Page: 222 / 248

Share
Download
Bosch Security Escort SE2000 Series Training Manual Download Page 222

222

en | System menus and dialogs

Security Escort

2017.08 | V2.18.1.0 | DOC

Training Manual

Robert Bosch (SEA) Pte Ltd

The alarm emails that were sent contain the alarm type, location area and date/time of the
alarm as the subject header. Name of the subscriber and the subscriber ID, phone number and
address are also included in the email content.

8.4

Print history screen

This selection will print the current data in the 

History Screen

 buffer to the report printer.

8.4.1

Print file dialog

Enter the name of the file to be printed or click the 

[Browse…]

 button to open the 

Common

Open File

 dialog. Then click the 

[Print]

 button to print the file to the report printer.

Figure 8.29: Print File Dialog

This is the standard Windows 

Common Open File

 dialog that is used for selecting the file to

be printed. It works the same as any other Window’s standard application.

Figure 8.30: Common Open File Dialog

Summary of Contents for Security Escort SE2000 Series

























































































































































































































































Reviews:

No comments