manualshive.com logo in svg

Bosch Security Escort SE2000 Series, Training Manual, Page: 176 / 248

Share
Download
Bosch Security Escort SE2000 Series Training Manual Download Page 176

176

en | Troubleshooting transponders, points, receivers, and alert units

Security Escort

2017.08 | V2.18.1.0 | DOC

Training Manual

Robert Bosch (SEA) Pte Ltd

Figure 7.38: Edit Alarm Report Information

7.15.4

Delete

This button deletes the alarm report from the database. If the report is deleted, the data can
not be recovered.

7.15.5

Locate Key

This button works similarly to the 

[Locate Key]

 button in the 

Operator

 and 

Subscriber

Database

. Entering the 

Subscriber Name

, 

Transmitter ID

, 

Subscriber ID

, 

Subscriber Class

,

problem type, or a specific time and date can locate a specific report.

Figure 7.39: Locate Alarm Database Record

As in the 

Operator

 and 

Subscriber Database

, the subscriber records are temporarily ordered

according to the field entered in the 

Locate Key

 dialog.

Summary of Contents for Security Escort SE2000 Series

























































































































































































































































Reviews:

No comments