manualshive.com logo in svg

Bosch Security Escort SE2000 Series, Training Manual, Page: 163 / 248

Share
Download
Bosch Security Escort SE2000 Series Training Manual Download Page 163

Security Escort

Troubleshooting transponders, points, receivers, and alert units | en

163

Robert Bosch (SEA) Pte Ltd

Training Manual

2017.08 | V2.18.1.0 | DOC

Data fields in required
order

Excel Column Restrictions

Alert Unit 2

AOY

This field contains the Transponder ID of the
alert unit. If this is not configured, this field is 0.
This field should contain only numeric ASCII
characters.

Alert Unit 2 Point

AOZ

This field contains the alert unit point number. If
this is not configured, this field is -1. This field
should contain only numeric ASCII characters.

Alert Unit 3

APA

This field contains the Transponder ID of the
alert unit. If this is not configured, this field is 0.
This field should contain only numeric ASCII
characters.

Alert Unit 3 Point

APB

This field contains the alert unit point number. If
this is not configured, this field is -1. This field
should contain only numeric ASCII characters.

Alert Unit Test

APC

This field contains the Transponder ID of the
alert unit. If this is not configured, this field is 0.
This field should contain only numeric ASCII
characters.

Alert Unit Test Point

APD

This field contains the alert unit point number. If
this is not configured, this field is -1. This field
should contain only numeric ASCII characters.

Point Location Text

APE

This field may be up to 100 characters. This field
may contain any printable ASCII character
except the ‘?’.

Map X Position

APF

X position of the point on the map. Default is 0.
This field should contain only numeric ASCII
characters.

Map Y Position

APG

Y position of the point on the map. Default is 0.
This field should contain only numeric ASCII
characters.

Sensitivity Adjust

APH

0-99. This field should contain only numeric
ASCII characters.

Bitmap Number

API

0-99. This field should contain only numeric
ASCII characters.

7.13.2

XML file format

XML or Extensible Markup Language is a markup language used to store and transport data in
both human-and machine-readable format.

Notice!

Area data of the transponders is supported in the XML file format.

Summary of Contents for Security Escort SE2000 Series

























































































































































































































































Reviews:

No comments