manualshive.com logo in svg

Bosch Security Escort SE2000 Series, Training Manual, Page: 129 / 248

Share
Download
Bosch Security Escort SE2000 Series Training Manual Download Page 129

Security Escort

Troubleshooting transponders, points, receivers, and alert units | en

129

Robert Bosch (SEA) Pte Ltd

Training Manual

2017.08 | V2.18.1.0 | DOC

Name

The individual or item assigned to this transmitter. This is a
required field.

Address

Address of this individual or item within the protected area.
The first address line on the left side, which is not the home
address, is shown on the alarm screen.

City

City of this individual or item within the protected area.

State

State of this individual or item within the protected area.

Zip

Zip code of this individual or item within the protected area.

Phone

The phone number to access this individual within the
protected area. The phone number on the left side, which is
not the home phone, is shown on the alarm screen.

Subscriber ID

The 

Subscriber ID

 (typically the Social Security Number) must

be typed into this field. This is a required field. It must be filled
in with a unique ID.

Transmitter ID / New ID

The transmitter identification code can be typed into this field,
but a much faster and error free method is to delete any
existing entry in the 

Transmitter ID

 field and then perform a

test with the transmitter to be assigned to this subscriber. The
new 

Transmitter ID

 displays in the 

New ID

 field. The new

Transmitter ID

 must be manually entered into the 

Transmitter

ID

 field, or use the mouse to highlight the existing 

Transmitter

ID

 and press and hold the <Shift> key and press the <Insert>

key. (This transfers the new 

Transmitter ID

 to the correct

field.) This is a required field; it must be filled in with a unique
ID. Complete the change to the Subscriber information by
clicking the 

[Save]

 button.

Alarm Zone

Specific alarm zones are assigned to the different computer
workstations of the Security Escort system. Each transmitter
entered in the 

Subscriber Database

 can be assigned to one or

more of the alarm zones. You may control on which computer
workstations alarms from this transmitter appear.

Alarm Background Color

Select the desired background color to display for alarm when
this transmitter is activated.

Female/Male 
Height
Build
Hair color
Eye color

These characteristics are shown on the alarm screen.

Image / [Browse]

Enter the filename for the image of this individual or item to be
shown on the alarm screen. Click the 

[Browse]

 button to open

a dialog box to select the filename from a list of available files.

Summary of Contents for Security Escort SE2000 Series

























































































































































































































































Reviews:

No comments