Cleaning and servicing
en
33
Basic setting
Display text
Selection
Description
Start programme
SP:01
1
SP:00 - SP:01
Set a default programme for when
the appliance is switched on.
¡
With the setting "SP:00", the last
programme selected is set by de-
fault when the appliance is
switched on.
¡
With the setting "SP:01", the Eco
50° programme is set by default
when the appliance is switched
on.
Tone volume
SL:02
1
SL:00 -SL:03
Adjustment of tone volume.
When you switch the appliance on or
off, a signal tone sounds.
Level "SL:00" switches the signal
tone off.
Button volume
bl:02
1
bl:00 - bl:03
Set the button volume during opera-
tion. Level "bl:00" switches the but-
ton tones off.
Factory setting
rE
Start with
Y:ES
Confirm with
Restore changed settings to the fact-
ory settings.
The settings for initial start-up must
be configured.
1
Factory setting (may vary according to model)
Changing basic settings
1.
Press .
2.
To open the basic settings, press
for 3 seconds.
a
The display shows H:xx.
a
The display shows
.
3.
Press
repeatedly until the
display shows the required setting.
4.
Press or repeatedly until the
display shows the right value.
You can change several settings.
5.
To save the settings, press
for 3 seconds.
Cleaning and servicing
Cleaning and servicing
Cleaning and servicing
To keep your appliance working effi-
ciently for a long time, it is important
to clean and maintain it carefully.
Cleaning the tub
WARNING
Risk of harm to health!
Using detergents containing chlorine
may result in harm to health.
▶
Never use detergents containing
chlorine.
1.
Remove any coarse soiling in the
interior with a damp cloth.
2.
Add detergent to the detergent dis-
penser.
