NLHome Connect
The Home Connect app guides you
through the entire registration
process. Follow the instructions in the
Home Connect app to make the
settings.
Connect device to WLAN home
network (Wi-Fi)
Requirements
†The Home Connect app is on the
mobile terminal installed.
†Wi-Fi on the router is activated. †The
appliance has
cation reception from the home
network (Wi-Fi).
Tips
†Take the supplied document
of Home Connect. †Also take
the directions
the Home Connect app.
Remark:Observe the safety
instructions in these operating
instructions and ensure that they are
also observed when you operate the
appliance via the Home Connect app.
1.
Scan the QR code using the Home
Connect app.
Quick start with Home
Connect
2.
Follow the instructions of the
Home Connect app.
Connect the device quickly and easily
to a mobile end device.
Install app
Home Connect settings
1.
Install the Home Connect app on the
mobile terminal device.
Adapt Home Connect to your needs.
You will find the Home Connect settings
in the basic settings of your appliance.
Which settings the display shows
depends on whether Home Connect is
installed and whether the appliance is
connected to the home network.
2.
Start the Home Connect app and
set up access for Home Connect.
Remote Start
The Home Connect app guides you
through the entire registration process.
You can start the appliance with your
mobile terminal device via the Home
Connect app.
Tip:If you are in the "Basic Settings"
Page 41If you set this function to
"Constant", the function is
permanently activated and you can
start the device at any time with a
mobile terminal device.
42
Summary of Contents for SBV8ZCX02E
Page 67: ......