19.3 Appendix III: Parameter List
19.3.1 Terminology and Abbreviation in Parameter List
●
Code: Function / parameter code, written in bx.xx, Cx.xx, Ex.xx, Ux.xx, dx.xx
●
Name: Parameter name
●
Default: Factory default
●
Min.: Minimum setting step
●
Attri.: Parameter attribute
– Run: Parameter setting can be modified when the converter is in run or
stop status.
– Stop: Parameter setting can only be modified when the converter is in stop
status.
– Read: Parameter setting is read-only and cannot be modified.
●
DOM: Depends on model
●
[bx.xx], [Cx.xx], [Ex.xx], [Ux.xx], [dx.xx]: Function / parameter values
VFC 3210
Bosch Rexroth AG
Appendix
DOK-RCON04-VFC3210****-IT01-EN-P
229/253