Target group
Prerequisite knowledge and ability
Project engineer
Technical basic education (advanced
technical education, engineering degree
or corresponding professional experi‐
ence),
Knowledge about:
●
the method of operation of a PLC
●
safety regulations
●
the application
Start-up technician
Technical basic education (advanced
technical education, engineering degree
or corresponding professional experi‐
ence),
Knowledge about:
●
safety regulations
●
the method of operation of the ma‐
chine or system
●
fundamental functions of the appli‐
cation
●
system analysis and troubleshooting
●
the setting options at the operating
devices
Service technician
Technical basic education (advanced
technical education, engineering degree
or corresponding professional experi‐
ence),
Knowledge about:
●
the method of operation of a PLC
●
safety regulations
●
the method of operation of the ma‐
chine or system
●
Diagnostic Configurations
●
systematic error analysis and trou‐
bleshooting
Fig.2-1:
Target group, prerequisites
2.4
Appropriate Use
2.4.1
Introduction
Rexroth products represent state-of-the-art developments and manufacturing.
They are tested prior to delivery to ensure operational safety and reliability.
Physical injury and material damage might re‐
sult from an inappropriate use of the products!
WARNING
The products are designed for the use in an industrial environment and may
therefore only be used for the intended purpose. If they are not used as inten‐
ded, situations causing personal injury as well as material damage can occur.
Bosch Rexroth AG
DOK-SUPPL*-VCH*08.1***-PR02-EN-P
Rexroth IndraControl VCH 08.1 Hand-held Terminal
12/117
Important Instructions on Use, Target Group and Purpose of the Document
