RE 51150-B/07.11 | Drive modules
Bosch Rexroth AG
37/
56
Operation
Operation
9
DANGER
Risk of breaking hose lines due to overload or aging!
Danger to life, risk of injury!
Replace the hose lines after 6 years at the latest or if damage is visible.
f
CAUTION
High noise development during operation!
Danger of hearing damage, deafness!
Always protect yourself by wearing ear protection when working close to the
f
drive module. The noise development may reach up to 80 dB(A) (UPE2) or
74 dB(A) (UPE5).
Hot surfaces!
Risk of injury! Risk of burning!
Only touch the drive module surfaces with protective gloves or do not work
f
at hot surfaces. During or after the operation, the temperatures may exceed
60 °C, depending on the operating conditions.
Allow the drive module to cool down sufficiently before touching it.
f
Observe the protective measures of the end machine manufacturer.
f
leakage at joints due to seal failure caused by excessive temperatures!
Risk of injury!
Ensure that with drive modules without temperature switch, the maximum
f
operating temperature remains within the temperature range prescribed in
the relevant data sheet.
NOTICE
Transmission of vibration from the machine by switching the hydraulic
valves at the control!
Unforeseeable reactions, risk of injury!
Put the drive module onto damping elements.
f
Use hose elements for connection.
f
As partly completed machinery, the drive module is intended for installation
into machinery.
Information on operating the drive module can only be provided in connection with
the machine.
For this information, please refer to the operating instructions of the ma-
chine manufacturer.
Information on the functional operation and logic of the drive module can be
obtained either from hydraulic experts or from the general and product-specif-
ic documentation.
The drive module may only be operated with the data admissible according to
chapter 16 "Technical data".
