6.6
Storage Times
Additional measures must be taken before storage and on commissioning to
preserve proper functioning – irrespective of the storage time which may be
longer than the warranty period of our products. However, this does not
involve any additional warranty claims.
Motors
Bearing time / months
Measures for commissioning
> 1
< 24
> 24
●
●
●
Control all parts to be free of damage.
●
●
Check all electrical contacts to be free from corrosion.
●
●
Manually turn the motor shaft in regular distances (min. 1x per
year) to spread the grease consistently.
●
●
Running in the motor without load at startup.
●
Additonally, in the case of a storage time of more than 2 years,
change the motor bearings.
Tab. 6-7:
Measures before commissioning motors that have been stored over a
prolonged period of time
Cables and Connectors
Bearing time / months
Measures for commissioning
> 1
> 12
> 60
●
●
●
Control all parts to be free of damage.
●
●
Check all electrical contacts to be free from corrosion.
●
Visually inspect the cable jacket. Do not use the cable if you de‐
tect any abnormalities (squeezed or kinked spots, color devia‐
tions, ...).
Tab. 6-8:
Measure before commissioning cables and connectors that have been
stored over a prolonged period of time
PGx
Bearing time / months
Measures for storage
< 9
< 24
> 24
●
Let the internal gear pump in its delivery state (moistened with
mineral oil)
●
●
Fill the internal gear pump with mineral oil
Measures for commissioning
●
●
●
Before mounting, check the complete internal gear pump for dam‐
age and corrosion.
●
●
●
At a test run, check the internal gear pump for functionality and
leakproofness.
●
Change the shaft sealing ring.
●
After the maximum storage time (24 months) we recommend a
preventive check of the internal gear pump with change of the
sealings by the responsible Rexroth service!
Tab. 6-9:
Measures for storage and before commissioning internal gear pumps
that have been stored over a prolonged period of time
DOK-SYTROX-MPES2******-IT01-EN-P
Rexroth Sytronix FcP 50xx/70xx Motor-Pump Unit MPES2
Bosch Rexroth AG
45/143
Transport and Storage
LSA Control S.L. www.lsa-control.com [email protected] (+34) 960 62 43 01