5.2.4
Axial Piston Pump A10VZO
You will find more details about operation conditions, connection conditions
and power limits in the data sheet RE 91485.
Fig. 5-5:
Axial piston pump A10
Driving shaft (1), retraction plate (2), high pressure side (3), control unit (4),
connection plate (5), suction port (6), low pressure side (7), cylinder (8), pis‐
ton (9), slide shoe (10), pivoting cradle (11)
5.2.5
Coupling and Bellhousing
The pump and the motor are connected together with the coupling and the
bellhousing. Additionally, an optional pump foot is fastened on the bellhous‐
ing or the motor-pump unit is directly connected with the system.
Depending from the size and fastening mode of the motor-pump unit, differ‐
ent couplings and bellhousings are available.
5.2.6
Standard Asynchronous Motor MOT-FC
For motor-pump units, MOT-FC motors with key shaft are used.
5.2.7
Pump Foot
The optional pump foot is fastened on the bellhousing of the motor-pump unit
and serves to assemble the motor-pump unit in the system.
Bosch Rexroth AG
DOK-SYTROX-MPES2******-IT01-EN-P
Rexroth Sytronix FcP 50xx/70xx Motor-Pump Unit MPES2
30/143
About this Product
LSA Control S.L. www.lsa-control.com [email protected] (+34) 960 62 43 01