Uncontrolled system behavior!
Risk of injury! The failure of individual compo‐
nents can lead to malfunction of the assem‐
bly and therefore to unforeseeable behavior!
CAUTION
●
Immediately have defective components exchanged.
Improperly laid lines and cables!
Risk of injury!
CAUTION
●
Lay cables and lines so that no one can trip over them.
●
Lay cables and lines so that they cannot be damaged by inflection or
shearing.
●
Lay cables and lines so that their insulation cannot be damaged due to
exposure to excessive heat.
2.7
Personal protective equipment
Wear suitable protective equipment (e.g. safety glasses, safety shoes, pro‐
tective gloves) when carrying out work (e.g. mounting, repair, maintenance)
on the self-contained servo-hydraulic linear axis.
All parts of the protective equipment must be fully functional.
2.8
Obligations of the machine end-user
The machine end-user of the Bosch Rexroth self-contained servo-hydraulic
linear axis is responsible that
●
the axis is only used according to the intended purpose as defined in
these operating instructions.
●
the axis is only stored, operated and maintained according to the speci‐
fied operating and environmental conditions, in particular that the speci‐
fied limit values are not exceeded.
●
the operating personnel are instructed at regular intervals.
●
a danger zone is marked, if required.
●
the safety precautions for the specific intended use of the axis are com‐
plied with.
Bosch Rexroth AG
Operating Instructions
14/91
Self-contained servo-hydraulic linear axis Type SHA...
Safety instructions
