Maintenance, Repair, Decommissioning, and Disposal
DOK-CONTRL-ILPSDO8****-AW04-EN-P
Bosch Rexroth AG
Rexroth Inline Module with Safe Digital Outputs R-IB IL 24 PSDO 8-PAC
10
Maintenance, Repair, Decommissioning, and Dis-
posal
10.1
Maintenance
The device is designed in such a way that maintenance work is not required during
the duration of use. However, depending on the application and connected I/O
devices it may be necessary to test the function of the I/O devices and the safety
chain at regular intervals.
The duration of use of the module is 20 years.
Repeat testing within this time is not required.
Carry out maintenance of connected I/O devices (e.g., light grid) according to the
relevant manufacturer specifications.
10.2
Repair
It is prohibited for the user to carry out repair work or make modifications to the
module.
The
housing must not be opened. If the housing is opened, correct opera-
tion can no longer be ensured.
In the event of an error, send the module to Bosch Rexroth or contact
Bosch Rexroth
immediately and engage a service engineer.
10.3
Decommissioning and Disposal
The machine or system manufacturer specifies the procedure for
decommissioning.
Decommissioning may only take place according to these specified procedures.
When decommissioning an PROFIsafe system or parts thereof, ensure that the
safety modules used:
•
Are correctly reused in another system.
In this case, please observe the storage and transport requirements
according to the technical data (see
“R-IB IL 24 PSDO 8-PAC” on page 65
Or
•
Are disposed of according to the applicable environmental regulations, and
in this case can never be reused.
