Bosch Rexroth PST 6 0 Series, Operating Instructions Manual

Page: 184 / 330

1070080029 / 05 Bosch Rexroth AG Electric Drives
and Controls PST 6xx0 | | 184 /330
Safety instructions
2.6.4 Electrical connection
WARNING
Dangerous electrical voltage
Possibility of cardiac arrhythmia, burns, shock!
"
The electrical connection may only be made by a skilled electri­
cian who observes the valid safety regulations, the mains voltage
and the maximum current consumption of the plant sections.
" Use suitable, insulated tools for all electrical connection work.
" Use appropriate fuses for the mains system.
Insufficient PE conductor system
Reduction of personal/plant safety!
"
The product must be connected to the PE conductor system of the
plant correctly.
"
Make sure that the conductor cross-section of the PE conductor is
of sufficient size.
"
The electrical continuity of the PE conductor system must be veri­
fied in accordance with EN 60204 Part 1.
Insufficient emergency–stop/emergency-halt facilities
Reduction of personal/plant safety!
"
Emergency–stop/emergency-halt facilities must be active and wi­
thin reach in all system modes.
"
Please note EN 60204-1.
" Releasing an emergency–stop/emergency-halt facility must not
result in an uncontrolled restart of the system.
"
Make sure that moving system elements are halted safely before
accessing the danger area of the system!
" Check the proper functioning of the emergency-stop/emergency-
halt circuit prior to start-up.
ENGLISH