Bosch Rexroth PSI 6100 L1 Series, Operating Instructions Manual

Page: 239 / 460

1070080028 / 08 Bosch Rexroth AG PSI 6xxx | 239 /460
Safety instructions
2 Safety instructions
This section includes important information on the safe handling of the
described product.
2.1 On this section
The described product has been developed, manufactured, tested and
documented in compliance with the EU standards.
Nevertheless there is a danger of personal injuries and damage to
property if you fail to observe this section and the safety instruction in
this documentation.
"
Therefore read this documentation carefully and fully before you
work with the product.
"
Keep the documentation so that all users have access to it any time.
" Always provide the product to third parties together with the product
documentation.
2.2 Intended use
• The product serves in connection with an integrated power unit and
appropriate welding transformer for resistance welding of metals.
• The product is only intended for professional/industrial operation
and not for private use.
• The product is intended for operation in industrial environments
(emission class A, group 2) and complies with the following direc­
tives and standards:
Directives
•
Low-voltage directive2014/35/EU
• EMC directive 2014/30/EU
Standards
•
EN50178
• EN60204‐1
• EN62135‐1
• EN62135-2
Intended use also means that you have read and understood the pro­
duct documentation.
2.3 Inappropriate use
The inappropriate use of the product may lead to operating statuses in
your application which cause physical injury and/or damage to
property.
"
Any use other than described as “intended use” is “inappropriate”
and therefore inadmissible.
Inappropriate use of the product includes in particular:
•
operation in potentially explosive atmospheres,
English