Bosch rexroth MS2N03-A Operating Manual Download

Page: 51 / 72

51 / 72

MS2N

Electrical connection

Bosch Rexroth AG

R911347581, Edition 05

7.4.14 Fan 3-phase 400 / 480 V

Fig. 22: MS2N Fan connection 400 / 480 V

Fig. 23: RLS0782_Single components fan

connector
Table 11: Connector fan unit for MS2N__-____C (U

400 / 480 V )

Assignment

Connection

0.5 … 2.5 mm

22 ... 12 AWG
Clamping screws M3 / tight-

ening torque 0.5 ... 0.7 Nm

n. c.
PE

Protection by motor protection switch

The fan units are connected via adjustable motor

protection devices. The motor protection switch

must be set to the rated current of the fan unit.

When selecting the motor protection switches,

make sure that the setting range matches the

rated current of the fan unit.

7.4.15 Ground connection

For MS2N motors, an additional grounding con-

nection is provided. Refer to the following data to

provide an additional grounding connection.

Ground connection

Screw M5

Clamping range

4 mm² (fine-wired); 6

mm² (single stranded)

Tightening torque

maximum 2 Nm

Mounting notes

The screw terminal

block with clamping

bracket has to be

assigned in a cor-

rect way according to

60999-1:

2000.

7.4.16 SpeedCon connectors

WARNING

Risk of personal injury or damage to property

due to disconnecting or connecting live plug con-

nections!

−

Only disconnect or connect plug connec-

tions when they are dry and de-energized.

−

During operation of the system, all plug con-

nections must be firmly locked or screwed

tight.

Observe when connecting the flange sockets:

•

Protect the device connectors from external

force effect.

•

Connect the motor to ready-made connec-

tion cables.

sembl

Summary of Contents for rexroth MS2N03-A









































































Search results

Summary of Contents for rexroth MS2N03-A

Reviews:

Related manuals for rexroth MS2N03-A

Brands by name

Popular brands

Bosch rexroth MS2N03-A, Operating Manual

Search results

Summary of Contents for rexroth MS2N03-A

Reviews:

Related manuals for rexroth MS2N03-A

Brands by name

Popular brands