Bosch rexroth MCL, Project Planning Manual

Page: 82 / 206

6.2 Identification
6.2.1 Identification MCP primary part
An engraved type designation is on the primary part.
① Type designation (not for MCP015)
② Serial number
Fig. 6-13: Position of type designation and serial number of primary part
Additionally, the primary part has two identical type plates at delivery. The
type plates allow an univocal identification of the primary part and can be
fixed on the machine or used be used elsewhere by the user.
1 Motor type
2 Type designation
3 Designation of origin
4 Factory number
5 Mass of primary part
6 EC declaration of conformity
7 Rated power
8 Maximum input voltage
9 Company address
10 Insulation system
11 Thermal class
12 Degree of protection by housing
13 Manufacturing date
14 Pole pitch
15 Rated current
16 Serial number
17 Change status
18 Rexroth barcode
19 Material number
20 China RoHS conformity mark
Fig. 6-14: Type plate example primary part
74/197
Identification
MCL Ironless Linear Motors
Bosch Rexroth AG R911330592_Edition 06