8/32
Safety instructions
Bosch Rexroth AG
, M4-12, RE 64276-01-R/10.2017
2.3 Product-specific safety instructions
The following safety instructions apply to section 5 to 7.
wARninG
Danger from suspended loads!
Risk of death or injury, or property damage.
Improper transportation may cause the control block to fall down and result in
injury, e.g. crushing or fractures, or damage to the product.
▶
Make sure that the lifting capacity of the lifting device is sufficient to safely bear
the weight of the control block.
▶
Never stand or put your hands under a suspended load.
▶
Make sure the unit remains stable during transport.
▶
Wear your personal protective equipment (e.g., safety goggles, safety gloves,
suitable working clothes, safety shoes).
▶
Use suitable lifting devices for transportation.
▶
Observe the prescribed position of the lifting strap.
▶
Observe the national laws and regulations on work and health protection and
transportation.
Machine under pressure!
Danger to life or risk of injury, serious injuries when working on machines not shut
down! Risk of property damage.
▶
Turn off the entire system and secure it against being restarted as specified by
the machine manufacturer.
▶
Make sure that all relevant components of the hydraulic system are
depressurized. Please follow the machine manufacturer's instructions.
▶
Note that the hydraulic system may still may be under pressure even after the
pressure supply itself has been disconnected.
▶
Do not disconnect any line connections, ports and components while the control
block is under pressure.
Escaping oil mist!
Risk of explosion and fire, health hazard, risk of environmental pollution.
▶
Depressurize all relevant components of the hydraulic system and repair
the leak.
▶
Only perform welding work when the machine is depressurized.
▶
Keep open flames and ignition sources away from the control block.
▶
If control blocks are located in the vicinity of ignition sources or powerful
thermal radiators, a shield must be erected to ensure that any escaped hydraulic
fluid cannot be ignited, and to protect hose lines from premature aging.
Electrical voltage!
Risk of death or injury from electric shock or risk of property damage!
▶
Always set up the relevant part of the machine so that it is deenergized before
you install the product or when connecting and disconnecting connectors.
▶
Secure the machine against being re-energized.
