manualshive.com logo in svg

Bosch rexroth M1, Instruction Manual

Share
Download
Bosch rexroth M1 Instruction Manual Download Page 6

6

/54

 

Control blocks for mobile applications

 | About this documentation

Bosch Rexroth AG, RE 64025-B/2021-08-12

Table 1: Required and supplementary documentation

Title

Document number

Document type

Flow sharing control block M6-15

64321

Flow sharing control block M6-22

64322

Flow sharing control block M7-20

64293

Flow sharing control block M7-22

64295

Flow sharing control block M7-25

64297

Flow sharing control block RS12

64133

Flow sharing control block RS14

64136

Flow sharing control block RS15

64134

Flow sharing control block RS20

64137

Flow sharing control block SX 10

64132

Flow sharing control block SX 12

64128

Flow sharing control block SX 14

64125

CAN-controlled pilot module CPM-1x

CANopen standard communication

64820-B

Instruction manual

CAN-controlled pilot module CPM-1x

CANopen special communication

64819-B

Instruction manual

Spool position sensor PSM

95190-B

Instruction manual

Order confirmation

Contains the order-related technical data of the control block.

Order confirmation

Offer drawing

Contains the outer dimensions, all connections and the hydraulic 
circuit diagram of the control block.

Offer drawing

Hydraulic fluids based on mineral oils and related hydrocarbons

Describes the requirements for hydraulic fluids on mineral oil basis 
and related hydrocarbons for operation with Rexroth hydraulic 
components and provides support for selection of suitable hydraulic 
fluids for the hydraulic system.

90220

Data sheet

Environmentally acceptable hydraulic fluids

Describes the requirements for environmentally acceptable hydraulic 
fluids on mineral oil basis and related hydrocarbons for operation 
with Rexroth hydraulic components, and provides support 
for selection of suitable hydraulic fluids for the hydraulic system.

90221

Data sheet

Reliability parameters MTTF

D

 for the functional safety 

according to ISO 13849

MTTF

d

 values for control blocks

90290

Data sheet

The related documentation can be obtained where necessary from Rexroth via 

www.boschrexroth.com/mobile-hydraulics-catalog

.

Summary of Contents for rexroth M1























































Reviews:

No comments

Brands by name

Popular brands

Load more brands