6/48
About this documentation
Bosch Rexroth AG
, M-.SED 10...XN..., RE 22045-XN-B/05.17
Safety instructions are structured as follows:
SIGnAl wORD
Type and source of danger!
Consequences in case of non-compliance
▶
Hazard avoidance measures
▶
<Enumeration>
• warning sign:
draws attention to the danger
• Signal word:
identifies the degree of danger
• Type and source of danger!:
specifies the type and source of danger
• Consequences:
describes the consequences in case of non-compliance
• Precaution:
specifies how the danger can be prevented
Table 2: Risk classes according to AnSI Z535.6-2006
warning sign, signal word
Meaning
DAnGER
Indicates a dangerous situation which will cause death or
severe injury if not avoided.
wARnInG
Indicates a dangerous situation which may cause death or
severe injury if not avoided.
CAUTIOn
Indicates a dangerous situation which may cause minor or
moderate (personal) injury if not avoided.
NOTICE
Damage to property: The product or the environment could
be damaged.
1.3.2 Symbols
The following symbols indicate notices which are not safety-relevant but increase the
comprehensibility of the documentation.
Table 3: Meaning of the symbols
Symbol
Meaning
If this information is not observed, the product cannot be used and/or
operated optimally.
▶
Individual, independent action
1.
2.
3.
Numbered instruction:
The numbers indicate that the actions must be carried out one after
the other.
1.3.3 Abbreviations
The following abbreviations are used in this documentation:
Table 4: Abbreviations
Abbreviation
Meaning
ATEX
EU Explosion Protection Directive
(Atmosphère explosible)
EN
European Standard
ISO
International Organization for Standardization
