Bosch Rexroth lndraDrive HCS02 Series, Project Planning Manual

Page: 285 / 382

Include the Bb1 contact in the control circuit for mains connection.
When Bb1 contact opens, the mains contactor must interrupt the
power supply.
See also chapter “Control Circuits for the Mains Connection” in the
documentation “Rexroth IndraDrive - Drive System, Project Plan‐
ning Manual”.
Technical Properties
Data Unit Min. Typ. Max.
number of poles 9
type spring terminal
design pins at device
connection cable solid wire mm 2 0,5 1,5
connection cable stranded wire mm 2 0,5 1,5
AWG 20 16
current consumption (X32.9,
X32.1)
A 0,1
voltage load capacity V DC30
Fig.8-43: Technical properties
8.14 X33, Acknowledge Messages of Integrated Mains Contactor
View
Fig.8-44: View
Function, Pin Assignment
Observe the functional differences between the connection points
X33 and X40, depending on the supply unit!
●
Supply units with integrated mains contactor:
X33 provides message signals on the status of the integrated
mains contactor
● Supply units without integrated mains contactor:
X40 receives message signals on the status of the external
mains contactor
Project Planning Manual | Rexroth IndraDrive Electric Drives
and Controls
| Bosch Rexroth AG 275/369
Functions and Electrical Connection Points