2
Environmental protection and disposal
In accordance with the valid national regulations, the products can be
disposed of in the normal recycling process.
Recycling
Most of the products can be recycled due to their high content of metal. The
products normally can be disposed of as entire units.
Basic components
Basically, the products consist of the following components:
●
Steel, aluminum, copper, brass
●
Plastics, insulation and composite materials
●
Electronic components
●
Permanent magnets
Danger due to permanent magnets!
WARNING
Health hazard for persons with heart pacemakers, hearing aids and metallic
implants in the immediate vicinity of permanent magnets.
Crushing hazard for fingers and hands due to strong attractive forces of the
magnets.
Risk of destruction of sensitive parts such as watches, credit cards, ...
Packaging
Our packaging materials do not contain any problematic materials and can be
recycled without any problem. We use the following packaging materials:
wood, cardboard and polystyrene.
Disposal by the manufacturer
Our products can be returned to us for disposal. Please make sure that the
products are free from oil, grease or other foreign materials or foreign
components.
Return the components in a suitable packaging (original packaging, if
possible). Observe the Dangerous Goods Regulations (IATA) when
transporting the rotor by air.
Deliver the products "free domicile" to the following address:
Bosch Rexroth AG
Electric Drives and Controls
Buergermeister-Dr.-Nebel-Strasse 2
97816 Lohr am Main, Germany
KSM02 Motor-Integrated Servo Drives Operation in Potential‐
ly Explosive Atmospheres ATEX Directive 2014/34/EU
19/29
Environmental protection and disposal
R911379011_Edition 02 Bosch Rexroth AG
