Bosch Rexroth IndraMotion MTX 11 VRS, Applications Manual, Page: 147 / 304

Subtracting Values To subtract a value from an existing value, a value with a leading minus sign
has to be entered when "Additive value entry" is active.
Arithmetic Operations Simple arithmetic operations with several levels of parentheses can also be
carried out when entering data in the "Additive value entry" mode.
function keys in the Table Editor
General
The following table lists all the general functions of table editors:
F-keypad
level
<F2> <F3> <F4> <F5> <F6> <F7> <F8> <F9>
1. Level
Exit editor
2. Level
File... Edit... Navigate... Tools... Exit editor
File
New... Open... Save As... Print Exit all edi‐
tors
Edit
Undo Redo Copy Paste
Navigate
Find... Find more Replace BoF EoF Previous
value
Next value
Tools
Options...
Fig.7-25: Function keys in the table editor
Functions on the Main Level
The functions on the main level (1st level) of F-keys are explained in the de‐
scription of the corresponding table editor.
Changing the Level It can be switched between the 1st and the 2nd level of the F-keypad using
<F8>.
Key switches to the 2nd level and switches back to the 1st level.
Exit Editor Pressing <F9> exits the table editor.
Functions on the 2nd Level of the F-keypad
The following functions can be found on the 2nd level of the F-keypad:
●
File
● Edit
● Navigate
● Tools
● Exit editor
All functions of the 2nd level, with the exception of "Exit editor", have a subor‐
dinate F-keypad in which additional subfunctions are grouped.
File
<F2 New This is used to create a new table and to display it in a new table editor. Amongst
other things, a name for the new table has to be entered in a dialog .
<F3 Open This is used to open a new table editor with the given table name.
DOK-MTX***-NC*OP***V11-AP01-EN-P
Rexroth IndraMotion MTX 11VRS Standard NC Operation Bosch Rexroth AG 145/301
Programming