With <F4> "Change NC sequence", existing block sequences can be edited.
The menus are laid out similarly to those under "New definition".
With <F5>"File handling", a new F-key layer for file operations is opened.
With <F6> "Select NC sequence", the desired sequence can be selected. When
"New NC sequence" is selected, this is always inserted ahead of it.
With <F7> "Channel selection for NC sequences…" you can switch between
global and channel-specific operation.
Exit the process and return to the NC editor using <F8>" Cancel" or via
<ESC>.
Press the <F9> "Accept" key to copy the selected block sequence into the last
cursor position space in the NC program.
Functions of the Second Level of F-keys
With <F2> "Copy" or <F3>"Cut", all NC block sequences of the selected chan‐
nel are put into buffer storage. After they are "pasted", the sources of the NC
block sequences that were edited using "Cut" are deleted.
With <F5> "Export", all of the NC block sequences of the selected channel are
placed into a file, which can be saved as desired.
With <F6> "Import", a file saved using "Export" can be pasted back into the
selected channel as NC block sequences.
With <F7> "Channel selection for NC sequences…", you can switch between
global and channel-specific NC block sequences.
With <F8> "Delete", the NC block sequences of the selected channel are per‐
manently removed.
With <F9> "Back", you can jump back to the first F-key level.
Paste - GNP Geometry (software license)
This function is used to retrieve the geometry definition of graphic NC pro‐
gramming. The command opens its own dialog box which covers that of the NC
Editor. GNP can only be used with the licenses for workshop programming of
turning or milling; otherwise, these functions are blocked.
You will find further information about GNP in the manual "IRexroth
IndraMotion MTX workshop programming turning and milling".
Paste - GNP Cycle (software license)
This function is used to retrieve the editing definition of graphic NC program‐
ming. The command opens its own dialog box which covers that of the NC
Editor. GNP can only be used with the licenses for workshop programming of
turning or milling; otherwise, these functions are blocked.
Paste - Paste Cycle
Overview
For frequently used processing procedures, retrievals of standard or user cy‐
cles can be pasted into the NC program. As long as all information about its
parameters and its retrieval are defined, a guided entry of all parameters can
be made using the cycles dialog box.
Application Description | Rexroth IndraMotion MTX 09VRS
Electric Drives
and Controls
| Bosch Rexroth AG
81/233
Programming
Change
File handling
Selection
Channel Selection
Cancel
Apply
Copy/Cut
Export
Import
Channel Selection
Remove
Back
