Fig.6-7:
Editing permitted
Fig.6-8:
Editing not permitted
F-keys of the MDI editor:
Fig.6-9:
F-keys of the MDI editor
<F2>
Channel reset; all modal states go to start values.
<F3>
The NC program display is called in place of the MDI editor in
the same window. This is necessary if a subroutine is retrieved
as the MDI block and the block sequence in the subroutine is
Application Description | Rexroth IndraMotion MTX 09VRS
Electric Drives
and Controls
| Bosch Rexroth AG
69/233
Operating Modes
