With the keys <PgUp>, <PgDn>, <Pos1 >and <End> you jump one screen side
upwards or downwards resp. to the first or the last entry in the list.
The columns of the list can be maximized or minimized by means of the mouse.
In the extreme case a column can be "hidden" by completely moving together
the column with the mouse. In order to re-open these hidden columns later on,
the mouse has to be moved from the right side over the respective column
separator and the column has to be zoomed out to the right while pressing the
left mouse key.
The changing of the sorting column and direction is only possible with the
mouse by clicking on the respective column head for one or several times. A
little triangle then marks the current sorting column and indicates the selected
sorting direction whereas the apex of the triangle shows in the direction of the
ascending values.
In spite of sorting, the order of the following groupings is always
adhered to:
●
The return label is always at the top
●
Afterwards all directories are shown.
●
The last group is the group of the files.
The MTX Navigator saves all column widths as well as the sorting column and
the sorting direction. These data are always saved on the hard disk when the
navigator is left and exited.
5.4.3
Functions
General Functions
General functions are not dependent on the context!
With the filter dialogue certain data types can be excluded from the display in
the list and thus the selection of the files can be limited.
Application Description | Rexroth IndraMotion MTX 09VRS
Electric Drives
and Controls
| Bosch Rexroth AG
47/233
General Operation and Visualization
Place File Filter
