Fig.11-25:
Calculation of polar coordinates from Cartesian coordinates
You can calculate the polar coordinates from Cartesian coordinates as follows:
1.
Make sure that the coordinate system on which your calculation is based
is activated. For diameter programming check "Turning".
2.
Enter the pole coordinates. As in all entry fields, expressions are allowed.
3.
Enter the horizontal and the vertical Cartesian coordinates in any order. If
only the distance of the point to the pole is known, activate ">>" in order
to switch over to the incremental entry. Enter the distance with sign and
always as radius measure.
4.
Initiate the calculation using the <return key> or by changing the focus.
Trigonometric Calculations
Fig.11-26:
Calculating a Cartesian coordinate and the radius
The specified calculation from an angle or a Cartesian coordinate is performed
as follows:
1.
Make sure that the coordinate system on which your calculation is based
is activated. For diameter programming check "Turning".
2.
Enter the pole coordinates. As in all entry fields, expressions are allowed
).
3.
Enter the angle coordinate in the provided field.
4.
Enter the given horizontal and/or vertical Cartesian coordinate. If only the
distance of the point to the pole is known, activate ">>" in order to switch
over to the incremental entry. Enter the distance with sign and always as
radius measure.
5.
Initiate the calculation using the <return key> or by changing the focus.
Application Description | Rexroth IndraMotion MTX 09VRS
Electric Drives
and Controls
| Bosch Rexroth AG 217/233
Extended Functionality
Calculating Polar Coordinates
Calculating a Cartesian Coordinate
and the Radius
