Data type
Template
D-corrections (.dct)
/database/DC1.dct
Zero offsets (.zot)
/database/ZO1.zot
Placements (.pmt)
/database/PM1.pmt
Fig.7-6:
Table templates
Table Names
The data type of a table can be determined on the basis of the file ending of
the table name.
Data type
File ending
D corrections
Dct (D correction table)
Zero points
Zot (zero offset table)
Placements
Pmt (placement table)
Fig.7-7:
Table file endings
7.4.2
Operation
Value Entry
Navigation and Selection of Cells
To enter a correction value, the desired entry cell of the value first has to be
selected as follows:
●
Click the mouse on the desired cell.
– or –
●
Navigate with the arrow keys until the desired cell is selected.
– or –
●
Navigate using the F-keys (see also
chapter "Functional Keys in the Table
The selected cell can be recognized by the dark blue background color.
Editing Values
Switching to the editing mode of the selected cell is carried out using one of the
following actions:
●
Entering a value or a character using the keyboard.
– or –
●
Pressing the <Enter> key.
– or –
●
Double-clicking the cell.
The editing mode is indicated by a flashing entry cursor in the corresponding
cell.
An edited value can be transferred using one of the following actions:
●
Pressing the <Enter> key.
– or –
●
Pressing the <Tab> key
– or –
●
Pressing an arrow key.
96/233
Bosch Rexroth AG | Electric Drives
and Controls
Rexroth IndraMotion MTX 09VRS | Application Description
Programming
Start Editing Mode
Transferring a Value
