7.4
D-Corrections, Zero Offsets and Placements
7.4.1
Overview
Editors for NC Data
The editors of the following NC data types are gathered together under the
general term "table editors":
●
D corrections
●
Zero points
●
Placements
Table editors are used for visualization and to enter correction data of the in‐
dividual NC data tables.
Screen Layout
Design
All table editors have a similar screen layout and regarding operation they are
identical.
Fig.7-4:
Screen layout of a table editor
Title Line
The title line shows the name of the table editor that is used, the directory and
the file name of the table.
Main Area
Correction values of an NC data table can be displayed and modified in the
main area of the table editor.
The correction blocks of an NC data table are displayed in the lines of the table,
while the corresponding values of a correction block are shown in the columns.
94/233
Bosch Rexroth AG | Electric Drives
and Controls
Rexroth IndraMotion MTX 09VRS | Application Description
Programming
