Bosch Rexroth IndraDrive Mi Page 252 Project Planning Manual Download

Page: 252 / 340

Cover for connection point

Protective sleeve for shaft

Fig. 9-1:

Protective sleeves

●

Avoid damage to the motor flange and drive shaft.

●

Avoid impacts on the drive shaft.

Fig. 9-2:

Handling the shaft end

Impacts on the shaft end damage encoder and ball bearing! Driving ele‐

ments, such as pulleys, coupling disks or toothed wheels, may only be moun‐

ted or dismounted by evenly heating up the driving elements or with the ap‐

propriate tool for mounting and dismounting.

9.1.2

System overview

Available connection points

The electrical connections of all sizes of KSM/KMS have been standardized:
●

Two power connections (hybrid connectors for power, control voltage,

master communication and status messages) to loop through the bus

cable

●

Two I/O connectors (M12, 5-pin)

●

One safety technology interface (M12, 12-pin)

●

Optional: two connection points for connecting the communication (M12,

4-pin)

Notes

All connections have been designed as plug-in connectors. This ensures

easy, quick and error-safe mounting and commissioning when using ready-

made Rexroth connection cables.

Bosch Rexroth AG

DOK-INDRV*-KCU02+KSM02-PR03-EN-P

250/337

Rexroth IndraDrive Mi Drive Systems with KCU02 KSM02, KMS02/03, KMV03, KNK03

Mounting and installation

LSA Control S.L. www.lsa-control.com [email protected] (+34) 960 62 43 01

Summary of Contents for Rexroth IndraDrive Mi





















































































































































































































































































































































Search results

Summary of Contents for Rexroth IndraDrive Mi

Reviews:

Related manuals for Rexroth IndraDrive Mi

Brands by name

Popular brands

Bosch Rexroth IndraDrive Mi, Project Planning Manual

Search results

Summary of Contents for Rexroth IndraDrive Mi

Reviews:

Related manuals for Rexroth IndraDrive Mi

Brands by name

Popular brands