Rexroth IndraDrive
Safety Instructions for Electric Drives and Controls
3-3
DOK-INDRV*-HMV-*******-PR01-EN-P
3.4 General
Information
•
Bosch Rexroth AG is not liable for damages resulting from failure to
observe the warnings provided in this documentation.
•
Read the operating, maintenance and safety instructions in your
language before starting up the machine. If you find that you cannot
completely understand the documentation for your product, please ask
your supplier to clarify.
•
Proper and correct transport, storage, assembly and installation as
well as care in operation and maintenance are prerequisites for
optimal and safe operation of this equipment.
•
Only persons who are trained and qualified for the use and operation
of the equipment may work on this equipment or within its proximity.
•
The persons are qualified if they have sufficient knowledge of the
assembly, installation and operation of the equipment as well as an
understanding of all warnings and precautionary measures noted in
these instructions.
•
Furthermore, they must be trained, instructed and qualified to
switch electrical circuits and equipment on and off in accordance
with technical safety regulations, to ground them and to mark them
according to the requirements of safe work practices. They must
have adequate safety equipment and be trained in first aid.
•
Only use spare parts and accessories approved by the manufacturer.
•
Follow all safety regulations and requirements for the specific
application as practiced in the country of use.
•
The equipment is designed for installation in industrial machinery.
•
The ambient conditions given in the product documentation must be
observed.
•
Use only safety features and applications that are clearly and explicitly
approved in the Project Planning Manual.
For example, the following areas of use are not permitted: construction
cranes, elevators used for people or freight, devices and vehicles to
transport people, medical applications, refinery plants, transport of
hazardous goods, nuclear applications, applications sensitive to high
frequency, mining, food processing, control of protection equipment
(also in a machine).
•
The information given in the documentation of the product with regard
to the use of the delivered components contains only examples of
applications and suggestions.
The machine and installation manufacturer must
•
make sure that the delivered components are suited for his
individual application and check the information given in this
documentation with regard to the use of the components,
•
make sure that his application complies with the applicable safety
regulations and standards and carry out the required measures,
modifications and complements.
•
Startup of the delivered components is only permitted once it is sure
that the machine or installation in which they are installed complies
with the national regulations, safety specifications and standards of the
application.
Summary of Contents for Rexroth IndraDrive HMV01.1E-W0030
