Bosch Rexroth IndraControl VPB 40.3, Operating Instructions Manual, Page: 9 / 64

15 Company address
Fig. 2-1: Exemplary type plates
2.2 Scope of delivery
●
Control cabinet PC
●
Safety instructions
●
24 V female connector strip
3 Use of the safety instructions
3.1 Structure of the safety instructions
The safety instructions are structured as follows:
Burns and chemical burns due to wrong
battery treatment!
CAUTION
Safety alert symbol
Signal word Consequences and
source of danger
Avoiding danger
Do not open the batteries and do not heat them over 80 °C.
Fig. 3-1: Structure of the safety instructions
3.2 Explaining signal words and safety alert symbol
The safety instructions in this documentation contain specific signal words (dan-
ger, warning, caution, notice) and, if necessary, a safety alert symbol (according
to ANSI Z535.6-2006).
The signal word is used to draw attention to the safety instruction and also pro-
vides information on the severity of the hazard.
The safety alert symbol (a triangle with an exclamation point), which precedes
the signal words danger,warning and caution is used to alert the reader to per-
sonal injury hazards.
DANGER
In case of non-compliance with this safety instruction, death or serious injury
will occur.
Control Cabinet PC Bosch Rexroth AG
Use of the safety instructions
DOK-SUPPL*-VPB*40.3***-IT05-EN-P
3/57