Bosch Rexroth IndraControl VDP 40.3 Project Planning Manual Download Page 11

Page: 11 / 64

VDP with Touch Screen and Customized Design

Fig. 1-3:

VDP with touch screen and customized design

1.3

Accessories

Using the Y-repeater (VAC01.1S-YD1-NNNN) provided as accessory, two

VDP displays can be connected to the control cabinet PC with CDI interface.

The Y-repeater can be cascaded. Therefore, three or more VDPs can be

connected to a control cabinet PC with CDI interface. Also refer to the

operating instructions on the Y-repeater:

R911336973

The Y-repeater can only be connected to a control cabinet PC

with CDI interface. An operation at the control cabinet PC with

CDI+ interfaces is not possible.

1.4

Commissioning

Mount the device properly (see

chapter 5 "Dimensions, Installation and

Wiring" on page 17

). Connect the device to the de-energized control

cabinet PC; then connect the 24 V supply voltage.

IndraControl VDP 16.3, VDP 40.3, VDP 60.3 Operator Display

5/57

System presentation

R911323862_Edition 07 Bosch Rexroth AG

Summary of Contents for Rexroth IndraControl VDP 40.3

































































Search results

Summary of Contents for Rexroth IndraControl VDP 40.3

Reviews:

Related manuals for Rexroth IndraControl VDP 40.3

Brands by name

Popular brands

Bosch Rexroth IndraControl VDP 40.3, Project Planning Manual

Search results

Summary of Contents for Rexroth IndraControl VDP 40.3

Reviews:

Related manuals for Rexroth IndraControl VDP 40.3

Brands by name

Popular brands