6.3
Operation
6.3.1
Key Positions
Fig.6-3:
Position of the keys on the VDP 08.3 and VDP 40.3
The keys are located below the screen.
6.4
Touch Screen
The application software is operated via the touch-sensitive interface of the
display.
Start the calibration via the preinstalled "IPCMnt.exe" maintenance program.
The program is to be found under Start ▶ ProgramFiles ▶ Bosch Rexroth.
The icons available on the touch screen depend on the used application soft‐
ware.
Danger of touch screen desctruction caused
by operating the touch screen with inappropri‐
ate objects (e.g. with a screwdriver)!
NOTICE
Operate the touch screen only with a touch pen or your finger.
DOK-SUPPL*-VDP*08.3***-PR02-EN-P
Rexroth IndraControl VDP 08.3/40.3 Operator Terminal
Bosch Rexroth AG
43/81
Display and Operating Components