7
-10
Bosch Rexroth AG
| Electric Drives and Controls
Rexroth IndraControl VCP 05
|
R911310377
/
02
Interfaces
1. Female Connector X5 (Ethernet)
2. Female Connectors X9, X10 (USB Host - Type A)
3. Female Connector X6 (DeviceNet)
4. Threaded Bolt for Protective Grounding
5. Connector X1 (Supply Voltage)
6. Diagnostics LED (DeviceNet)
7.3.1.1
Pin Assignment
Fig. 7-16:
5 pin connector
Connector in the small operating terminal: 5 pin male connector strip.
7.3.1.2
Cable
The maximum length allowed for spur lines connected to the bus cable
is 6 meters. The overall length of the bus cable including all spur lines
is not to exceed the maximum length listed in the table below.
Pin
Designation
Function
1
nc
Not Connected
2
CAN_L
CAN_L Bus Line (Dominant LOW)
3
Drain
Shield
4
CAN_H
CAN_H Bus Line (Dominant HIGH)
5
nc
Not Connected
Fig. 7-17:
Pin assignment of DeviceNet interface
For the connection, use a 5 pin connector with gold-plated contacts and
cover cap.
A DeviceNet-certified cable must be used.
Cable
type
Loop resistance
Surge
impedance
Capacitance per
unit length
2 x 1.1 mm < 22.6 Ohm/km
120 Ohm
< 39.4 pf/m
2 x 0.6 mm < 91.8 Ohm/km
120 Ohm
< 39.4 pf/m
Fig. 7-18:
Data line DeviceNet
Summary of Contents for Rexroth IndraControl VCP 05.2
Page 77: ......
