6
-6
Bosch Rexroth AG
| Electric Drives and Controls
Rexroth IndraControl VCP 05
|
R911310377
/
02
Display and Operating Components
6.2.4
Function Keys
6.2.4.1
Slide-in Identification Strips for the Function Keys
The identifications strips can be replaced when the operating device is
built-in or removed. Inserting the strip from the rear side of the front
plate does not influence the specified seal of the operator terminal. A
set of identification strips is supplied with the operator terminal.
For the labeling use:
Fig. 6-2:
Position of the slide-in identifications strips
Fig. 6-3:
Set of slide-in identifications strips
The function of function keys can be assigned as required (softkey func-
tionality). The function keys can optionally be used as direct selection
keys for menu control or to trigger a function in the controller.
Single pieces, prototypes
Label with a water-resistant pen
Small series
Copying foil (thickness <= 70 µm) with
laser print
Large series
Customer-specific labeled identification
strips
Summary of Contents for Rexroth IndraControl VCP 05.2
Page 77: ......
