6.1.2
Connection Overview
Designa‐
tion at the
housing
Connection type
Connector type (in‐
tegrated)
Mating connector or cable
(from outside)
X1S1
24 VDC power sup‐
ply
Phoenix connector
terminal,
PC4/2-G-7,62, 2-
pin
Phoenix female connector
terminal, PC4/2-St-/-7.62, 2-
pin
X1S2
24 VDC output volt‐
age
Phoenix connector
terminal,
PC4/2-G-7,62, 2-
pin
Phoenix female connector
terminal, PC4/2-St-/-7.62, 2-
pin
XCOM1
Serial
interface
RS232
(special
assign‐
ment, see chapter
)
D-Sub female con‐
nector, 9-pin
D-Sub male connector, 9-pin
X1N1
115/230 VAC power
supply
IEC AC connector
Power line, minimum 3 ×
0.75 mm
2
Fig.6-2:
Interfaces
All the mating connectors, apart from the feeder, are included in the
scope of delivery.
6.2
Voltage Connection
6.2.1
General Information
The supply voltage of 24 V is connected to the X1S1 interface, the mains volt‐
age is connected to the X1N1 interface. The output voltage of 24 V is provided
at the X1S2 interface.
24 V In
0 V In
Fig.6-3:
Connection of the 24 V voltage supply at the connector
Use only copper wire for connecting these terminals. Tighten the
screws of the screw terminal blocks with a tightening torque of 5.5
lb in (0.6 Nm).
22/45
Bosch Rexroth AG | Electric Drives
and Controls
Rexroth IndraControl VAU 01.1Z | Project Planning Manual
Interfaces, Display and Operating Components
