manualshive.com logo in svg

Bosch Rexroth IndraControl VAU 01.1U, Project Planning Manual

Share
Download
Bosch Rexroth IndraControl VAU 01.1U Project Planning Manual Download Page 10

The  UPS  may  only  be  operated  under  the  mounting  and  installation  condi‐

tions, the position, and the ambient conditions (temperature, degree of pro‐

tection, humidity, EMC etc.) specified in the related documentation.

2.2 

Unintended Use

The use of the UPS in applications other than those specified or described in

the documentation and the technical specifications is considered as "uninten‐

ded".
The UPS must not be used if
●

it  is  exposed  to  operation  conditions  which  do  not  correspond  to  the

specified ambient conditions. Operation under water, extreme tempera‐

ture fluctuations or extreme maximum temperatures is prohibited.

●

the  intended  applications  have  not  expressly  been  allowed  by  Bosch

Rexroth. Please read the information given in the general safety instruc‐

tions!

Bosch Rexroth AG

 DOK-SUPPL*-VAU*01.1U**-PR03-EN-P

 Rexroth IndraControl VAU 01.1U UPS with USB interface

8/63

Important Instructions on Use

Summary of Contents for Rexroth IndraControl VAU 01.1U



































































Reviews:

No comments

Brands by name

Popular brands

Load more brands