Bosch rexroth IndraControl VAC 08.1, Operating Instructions Manual

Page: 19 / 40

Name at the
housing
Connection type Connector type (integra-
ted)
Mating connector or cable
(from outside)
XCDI+tx2 CDI+ interface to the sec-
ond operator display
RJ45 socket RJ45 plug
Functional earth (FE) M5 Ring cable lug
Tab. 9-1: Interfaces and connections at the CDI+ splitter
9.1 24 V voltage supply and digital 24 V inputs
9.1.1 VAC 08.1 – Connection terminal X1S1
Pin Labeling Function
1 24 + 24 V supply voltage
2 24 – 0 V supply voltage
3 MOD/SEL – 0 V for switching and MOD
4 SEL + 24 V switching input
5 MOD + Enables the operation at both oper-
ator displays or at no operator dis-
play
Tab. 9-2: Pin assignment X1S1
For the function on the digital inputs, refer to: chapter 12.1 "Func-
tion of the digital inputs" on page 24 .
Operating the operator display as well as the USB data traffic only
possible at the active operator display. The screen is always output
on both operator displays
IndraControl VAC 08.1 CDI+ Splitter 13/33
Interfaces
R911400465_Edition 01 Bosch Rexroth AG