DEUT
SCH
ENGLISH
IT
A
L
IA
NO
ESPA
ÑOL
SV
ENS
K
A
FR
ANÇAIS
ENGL
IS
H
ENGL
IS
H
3608870DD4/2015-09 |
ErgoSpin/CC-ErgoSpin
Bosch Rexroth AG
77
/110
Assembly
6
Assembly
CAUTION
The product is not protected against
incorrect assembly/disassembly!
Risk of injury and damage to the device
during subsequent operation.
Assemble/disassemble the product
according to the following information
and in the correct order.
Only qualified personnel are autho-
rized to assemble/disassemble the
product.
Do not clamp the hand-held nutrunner
in a vise or similar.
Disconnect the plug from the socket
before assembling/disassembling ac-
cessories.
CAUTION
Improper handling!
Under unfavorable conditions, handling or
assembling/disassembling specific parts
and components in an unsuitable manner
can cause injuries. Injury due to crushing,
shearing, cutting, impact!
Observe the general construction and
safety regulations for handling and as-
sembly/disassembly.
Use suitable assembly/disassembly
and transport equipment.
Prevent trapping and crushing injuries
by taking appropriate steps.
Only use suitable tools.
Use special tools if such are speci-
fied.
Use tools appropriately.
If necessary, use suitable protective
equipment (e. g. protective goggles,
safety shoes, protective gloves).
Do not stand under suspended loads.
Lay cables and lines in accordance
with the permissible bending radiuses
so that they cannot be damaged and
no one can trip over them.