DEUT
SCH
ENGLISH
IT
A
L
IA
NO
ESPA
ÑOL
SV
ENS
K
A
FR
ANÇAIS
ENGL
IS
H
ENGL
IS
H
3608870DD4/2015-09 |
ErgoSpin/CC-ErgoSpin
Bosch Rexroth AG
65
/110
About this document
1.3
Display of information
In order to enable you to work with your prod-
uct in a fast and safe way, uniform safety in-
structions, symbols, terms and abbreviations
are used. For a better understanding, they
are explained in the following sections.
1.3.1
Safety instructions
In this documentation, any sequence that en-
tails a risk of personal injury or damage to
equipment is preceded by safety instruc-
tions. The hazard avoidance measures de-
scribed must be observed.
Safety instructions are structured as follows:
•
Warning symbol:
alerts the user to the
hazard
•
Signal word:
identifies the severity of the
hazard, see Table 2 on page 66
•
Type of hazard:
identifies the type or
source of the hazard
•
Consequences:
describes the conse-
quences of failing to comply with the safety
instructions
•
Precautions:
indicates how the hazard
can be avoided
Tab.1: Required and additional documentation
Title
Document number
Document type
Safety Instructions for Rexroth
Tightening Systems
3 608 870 2DE
Safety regulation
Documentation of the machine or system manu-
facturer
Instructions for the other system components
Generally applicable, legal and other binding regu-
lations of European and national legislation
Provisions for accident prevention and environ-
mental protection applicable in your country
DIN 13 sheet 13
SIGNAL WORD
Type of hazard
Consequences of failure to follow the
safety instructions
Hazard avoidance