Bosch Rexroth BTV 20.4A, Planning Manual

Page: 15 / 138

3 Safety Instructions for Electric Drives and Controls
3.1 Definitions of Terms
The entire documentation used to inform the user of the product about the use
and safety-relevant features for configuring, integrating, installing, mounting,
commissioning, operating, maintaining, repairing and decommissioning the
product. The following terms are also used for this kind of documentation: User
Guide, Operation Manual, Commissioning Manual, Instruction Manual, Project
Planning Manual, Application Manual, etc.
Combination of elements with a specified function, which are part of a piece of
equipment, device or system. Components of a drive and control system are,
for example, supply units, drive controllers, mains choke, mains filter, motors,
cables, etc.
Several interconnected control components placed on the market as a single
functional unit.
Finished product with a defined function, intended for users and placed on the
market as an individual piece of merchandise.
A group of components consisting of electric motor(s), motor encoder(s) and
cable(s), supply units and drive controllers, as well as possible auxiliary and
additional components, such as mains filter, mains choke, etc.
Objects used to generate, convert, transmit, distribute or apply electrical ener‐
gy, such as machines, transformers, switching devices, cables, lines, power-
consuming devices, circuit board assemblies, plug-in units, control cabinets,
etc.
Several devices or systems interconnected for a defined purpose and on a de‐
fined site which, however, are not intended to be placed on the market as a
single functional unit.
Entirety of interconnected parts or units at least one of which is movable. Thus,
a machine consists of the appropriate machine drive elements, as well as con‐
trol and power circuits, which have been assembled for a specific application.
A machine is, for example, intended for processing, treatment, movement or
packaging of a material. The term "machine" also covers a combination of ma‐
chines which are arranged and controlled in such a way that they function as a
unified whole.
Individual or legal entity bearing responsibility for the design and manufacture
of a product which is placed on the market in the individual's or legal entity's
name. The manufacturer can use finished products, finished parts or finished
elements, or contract out work to subcontractors. However, he must always
have overall control and possess the required authority to take responsibility
for the product.
Produced device, component, part, system, software, firmware, among other
things.
Part of the application documentation used to support the dimensioning and
planning of systems, machines or installations.
In terms of this application documentation, qualified persons are those persons
who are familiar with the installation, mounting, commissioning and operation
of the components of the drive and control system, as well as with the hazards
this implies, and who possess the qualifications their work requires. To comply
with these qualifications, it is necessary, among other things,
●
to be trained, instructed or authorized to switch electric circuits and devi‐
ces safely on and off, to ground them and to mark them,
Project Planning Manual | Rexroth MTA 200 Electric Drives
and Controls
| Bosch Rexroth AG 13/135
Safety Instructions for Electric Drives and Controls
Application Documentation
Component
Control System
Device
Drive System
Electrical Equipment
Installation
Machine
Manufacturer
Product
Project Planning Manual
Qualified Persons