4
System presentation
4.1
Brief description
Machine control panels supplement operator and visualization terminals.
They are used for the operation mode selection and the manual machine op‐
eration. Thus, the machine control panels contain operating elements, e. g.,
keys with LED displays, rotary switches for feed and spindle override, E-
STOP button, key switch with authorization system and machine button.
The Maschinenbedienfelder VAM 10.2/VAM 40.2 were designed for being
used with the devices of the VPB, VPP, Vxx product family and are adapted
to the design of these devices. The VAM 10.2 width corresponds to the VPP
16 panel PC width. The VAM 40.2 width corresponds to the VPP 40 panel PC
width.
VAM devices are Maschinenbedienfelder for CNC machines with Profibus
connection.
4.2
Standard variantsVAM 10.2/VAM 40.2
4.2.1
Overview on standard variants
The VAM 10.2/VAM 40.2 machine control panels are available in different
standard variants:
Keypad with keys
and LED that can be
labeled and program‐
med freely
Further elements
Ordering numbers
and type codes
VAM 10.2 2 keypads, each with
15 keys
●
E-STOP button
●
Priority switch
●
2 override rotary
switches for feed
and spindle
●
Quick stop module
with two machine
buttons
R911170770
VAM10.2-PB-NA-
TA-TA-VB-1608-NN
VAM 40.2
2 keypads, each with
15 keys
●
E-STOP button
●
Priority switch
●
2 override rotary
switches for feed
and spindle
R911170772
VAM40.2-PB-NA-
TA-TA-VB-
MA-1608-NN
Tab. 4-1:
VAM 10.2/VAM 40.2 standard variants
4.2.2
Rear side
The following components are located on the rear side of the VAM 10.2/
VAM 40.2 devices:
●
25-pin connector to connect a handwheel device
●
6-pin connector to connect a handwheel
●
16 digital 24 V inputs
●
8 digital 24 V outputs
DOK-SUPPL*-VAM*XX.2***-PR03-EN-P
Bosch Rexroth AG
11/69
Rexroth IndraControl VAM 10.2/40.2 Machine Control Panels
System presentation
