Move function
en
15
u
Move function
Move function
This function activates the entire flexible cooking zone,
which is divided into three cooking areas and which has
preset heat settings.
Only use one item of cookware. The size of the cooking
area depends on the cookware used and whether it is
positioned correctly.
This means that an item of cookware can be moved
during the cooking process to another cooking area
with another heat setting:
Preset heat settings:
Front area = heat setting
Š
Middle area = heat setting
†
Rear area = heat setting
‚
.
†
The preset heat settings can be changed independently
of one another. You can find out how to change these in
the section on
.
Notes
■
If more than one item of cookware is detected on the
flexible cooking zone, the function is deactivated.
■
If the cookware is moved within the flexible cooking
zone or lifted up, the hob automatically starts
searching and the heat setting of the area in which
the vessel was detected is set.
■
You can find information on the size and positioning
of the cookware in the section on
Activation
1.
Select one of the two hotplates in the flexible
cooking zone.
2.
Touch the
ç
symbol. The indicator beside the
ç
symbol lights up. The flexible cooking zone is
activated as a single hotplate.
The heat setting in the area in which the cookware is
located lights up in the hotplate display.
The function has now been activated.
Changing the heat setting
The heat settings for the individual cooking areas can
be changed during the cooking process. Set the
cookware down on the cooking area and change the
heat setting in the settings range.
Notes
■
Only the heat setting in the area in which the
cookware is located is changed.
■
If the function is deactivated, the heat settings for the
three cooking areas are reset to the preset values.
Deactivating
Touch the
ç
symbol. The indicator beside the
ç
symbol goes out.
The function was deactivated.
Note:
If one of the cooking areas is set to
‹
, the
function deactivates after a few seconds.
Cooking areas
