Time-setting options
en
11
You can change the standard setting of the preset
power levels. You can find out how to do this in the
"Basic settings" section →
.
9.2 Activating MoveMode
Requirement:
Only place one item of cookware on a
flexible zone.
1.
Select one of the two cooking zones in the flexible
zone.
2.
Press
.
a
The power level in the area in which the cookware
is located lights up in the cooking zone display next
to
.
a
The function is switched on.
Note:
You can change the power levels during cook-
ing.
9.3 Deactivating MoveMode
▶
Touching
a
The display beside
switches off.
a
The function has been deactivated.
10 Time-setting options
Your hob has various functions for setting the cooking
time:
¡
Switch-off timer
¡
Timer
¡
Count-up timer
10.1 Switch-off timer
Allows you to program a cooking time for one or more
cooking zones. Once the time has elapsed, the cook-
ing zone is automatically switched off.
Switching on Switch-off timer
1.
Select the cooking zone and the power level.
2.
Press .
a
The indicator for the hotplate will light up.
3.
Set the time on the control panel.
‒
To set a cooking time of less than 10 minutes,
always touch 0 before you select the required
value.
4.
Press to confirm.
a
The cooking time begins to count down.
a
Once the cooking time has elapsed, the cooking
zone switches itself off and an audible signal
sounds.
Note:
When you set a cooking time for a cooking zone
in which the PerfectFry Sensor is activated, the cooking
time will not start counting down until the selected tem-
perature level has been reached.
Changing or switching off Switch-off timer
1.
Select the cooking zone and touch .
2.
In the settings area, change the time or set to
to
delete the time.
3.
Press to confirm.
10.2 Timer
Enables the activation of a timer of 0–99 minutes. This
function can be used independently of the cooking
zones and other settings. It does not automatically
switch off the cooking zones.
Switching on Timer
1.
Touch .
2.
Set the desired time on the control panel.
3.
Press to confirm.
a
The time will begin to elapse.
a
An audible signal sounds once the time has
elapsed.
Changing or switching off the Timer
1.
Touch .
2.
In the settings range, change the time or set to
to delete the time.
3.
Press to confirm.
10.3 Count-up timer
The stopwatch function displays the time that has
elapsed since activation.
Switching on Count-up timer
▶
Touch .
a
The time will begin to elapse.
Switching off Count-up timer
1.
Touch . The stopwatch stops. The timer displays
remain lit.
2.
Touch . The displays go out.
