Bosch PVQ F2 Series, User Manual, Page: 15 / 32

PowerBoost
en
15
11.1 Setting the time
The cooking zone switches off automatically once the
time that is set has elapsed. You can set a cooking
time of up to 99 minutes.
Note:
When you set a cooking time for a cooking zone
in which the frying sensor is activated, the cooking time
will not start counting down until the selected temperat-
ure level has been reached.
Programming the cooking time
1.
Select the cooking zone and the power level.
2.
Touch ⁠.
a The display lights up in the cooking zone.
a
lights up in the timer display.
3. Within the next 10 seconds, set the required cook-
ing time in the settings range.
‒
To set a cooking time of less than 10 minutes,
always touch 0 before you select the required
value.
a
The time starts to elapse.
Notes
¡
To view the remaining cooking time, select the cor-
responding cooking zone.
¡
If you have set a cooking time for several cooking
zones, the time information for each of the selected
cooking zones always appears in the timer display.
¡
If you select the CombiZone function for the com-
bined cooking zone, the set time for both cooking
zones is the same.
Changing or deleting the cooking time
1.
Select the cooking zone and then touch ⁠.
2.
To delete the time, change the cooking time in the
settings range or set to
⁠.
Once the cooking time has elapsed
The cooking zone switches itself off. An audible signal
sounds and the
appears in the timer display for
10 seconds.
▶
Touch ⁠.
a The displays go out and the audible signal stops.
11.2 Automatically programming the
cooking time
You can automatically set the same cooking time for all
cooking zones. The set time for each of the cooking
zones counts down independently of the others.
You can find more information about this at
→
"Basic settings", Page 18 .
11.3 Short-term timer
You can use the short-term timer to set a time of up to
99 minutes. This function operates independently of the
cooking zones and other settings. This function does
not automatically switch off a cooking zone.
Setting the short-term timer
1.
Touch repeatedly until the display lights up.
a
lights up in the timer display.
2. Set the desired time in the settings range.
a
After a few seconds, the time begins to elapse.
Changing or deleting the timer duration
1.
Touch repeatedly until the display lights up.
2.
In the settings range, change the time or set to
to delete the time.
Once the timer duration has elapsed
A signal sounds. appears in the timer display and
the display lights up. The displays go out after
10 seconds.
▶
Touch ⁠.
a The displays go out and the audible signal stops.
12 PowerBoost
The PowerBoost function enables you to heat up large
quantities of water faster than when using power
level ⁠.
You can activate this function for a cooking zone,
provided the other cooking zone in the same group is
not in use (see illustration). Otherwise, and flash in
the display for the selected cooking zone. Power
level is then set automatically without activating the
function.
Note:
In the combi zone, you can only activate the
PowerBoost function if you are using the two cooking
zones as two independent cooking zones.
12.1 Activating the PowerBoost function
1.
Select the cooking zone.
2.
Select power level and then touch . The
display lights up.
a
The function has been activated.
12.2 Deactivating the PowerBoost function
1.
Select the cooking zone.