Bosch Professional GLM 50-27 CG, Original Instructions Manual

Page: 29 / 125

English | 29
temperature variation, the measuring tool must adjust to the ambient temperature for a
while before calibration is performed.
Accuracy Check of the Distance Measurement
You can check the accuracy of the measuring tool as follows:
– Choose a measuring section of approx. 3–10 m in length that is permanently un-
changed, the exact length of which is known to you (e.g. room width, door opening).
The measurement should be taken under favourable conditions, i.e. the measuring
section should be indoors and the target surface for the measurement should be
smooth and reflect well.
– Measure the section ten times in succession.
The deviation of the individual measurements from the mean value must not exceed
±4 mm over the entire measuring section in favourable conditions. Record the measure-
ments in order to be able to compare the accuracy at a later date.
Working with the tripod (accessory)
The use of a tripod is particularly necessary for larger distances. Place the measuring tool
with the 1/4" thread
(14) on the quick-release plate of the tripod (21) or of a commer-
cially available camera tripod. Tighten it using the locking screw of the quick-release
plate.
Set the reference level for measurements with a tripod in the settings (see "Selecting the
reference level (see figure
A )", page 20).
Belt clip (accessory) (see figure M)
With the belt clip (17) , the measuring tool can be conveniently secured to your belt.
Error message
If a measurement cannot be performed correctly, the “Error” message will appear in the
display. Start the measurement again.
The measuring tool monitors correct functioning in every measure-
ment. If a defect is detected, the display will indicate only the symbol
shown opposite and the measuring tool switches itself off. In this
case, have the measuring tool checked by an after-sales service agent for Bosch power
tools.
Maintenance and Service
Maintenance and Cleaning
Store and transport the measuring tool only in the supplied protective bag (23) .
Bosch Power Tools 1 609 92A 5YM | (19.01.2021)