English |
13
(3)
Battery
A)
(4)
Battery release button
A)
(5)
"Automatic shutdown (ABR)" button
(6)
"PowerLight" lamp
(7)
"Automatic shutdown (ABR)" LED
(8)
Rotational direction switch
(9)
On/off switch
(10)
Handle (insulated gripping surface)
(11)
Application tool (e.g. impact socket)
A)
A)
Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Cordless Impact Wrench
GDS 250-LI
Article number
3 601 JG6 1..
Rated voltage
V=
18
No-load speed
A)
min
-1
0–2 400
Impact rate
A)
min
-1
0–3 300
Max. torque
A)
Nm
250
Machine screw diameter
mm
M10–M18
Tool holder
∎
½"
Weight according to
EPTA-Procedure 01:2014
B)
kg
1.9–2.0
Recommended ambient tem-
perature during charging
°C
0 to +35
Permitted ambient temperat-
ure during operation
C)
and
during storage
°C
–20 ... +50
Recommended rechargeable
batteries
GBA 18V...
ProCORE18V...
Recommended chargers
GAL 18...
GAX 18...
GAL 36...
A) Measured at 20−25 °C with rechargeable battery
GBA 18V
3.0Ah
.
B) Depends on battery in use
C) Limited performance at temperatures <0 °C
Noise/vibration information
Noise emission values determined according to
EN 62841-2-2
.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level
102
dB(A); sound power level
113
dB(A). Uncertainty K =
3
dB.
Wear hearing protection!
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to
EN 62841-2-2
:
Tightening screws and nuts of the maximum permitted size:
a
h
<
14.5
m/s
2
, K =
1.5
m/s
2
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
Assembly
u
Remove the battery from the power tool before carry-
ing out work on the power tool (e.g. maintenance,
changing tool, etc.). The battery should also be re-
moved for transport and storage.
There is risk of injury
from unintentionally pressing the on/off switch.
Battery charging
Note:
The battery is supplied partially charged. To ensure
full battery capacity, fully charge the battery in the charger
before using your power tool for the first time.
The lithium-ion battery can be charged at any time without
reducing its service life. Interrupting the charging process
does not damage the battery.
The lithium-ion battery is protected against deep discharge
by the "Electronic Cell Protection (ECP)". When the battery
is discharged, the power tool is switched off by means of a
protective circuit: The application tool no longer rotates.
u
Do not continue to press the On/Off switch after the
power tool has automatically switched off.
The battery
can be damaged.
Removing the Battery
The battery
(3)
is equipped with two locking levels to pre-
vent the battery from falling out when pushing the battery re-
lease button
(4)
unintentionally. As long as the battery is in-
serted in the power tool, it is held in position by means of a
spring.
To remove the battery
(3)
, press the release button
(4)
and
pull the battery out of the power tool.
Do not use force to
do this.
Battery charge indicator
The green LEDs on the battery charge indicator indicate the
state of charge of the battery. For safety reasons, it is only
Bosch Power Tools
1 609 92A 4VZ | (13.10.2020)
