Bosch Security Systems | 2011-02
Praesideo 3.5
| Installation and User Instructions | 9 | System Configuration
en
| 386
47.3 Actions
47.3.1 Introduction
The action determines which action is triggered if the
control input or key becomes active. The behavior that
can be assigned to a control input or key, depends on
the action type, since some combinations of actions and
behaviors are not useful (see section 47.3.2).
Note
The
Action programming
pages for a call station
basic or call station toolkit always contain a
General
section and up to 16
Keypad
sections.
In the
General
section, the properties of the PTT
key of the call station can be defined. This key
always has the
Press-to-talk
(PTT) action.
