Bosch Security Systems | 2011-02
Praesideo 3.5
| Installation and User Instructions | 9 | System Configuration
en
| 343
43.2.5 Control inputs
Multiple calls can be started or stopped from a single
control input or keypad key.
•
This applies to
Call activation
inputs/keys,
Start
inputs/keys and
Stop
inputs/keys.
•
Up to five calls can be started/stopped by a single
action, e.g. an evacuation message on one floor and
alert messages on lower and higher floors.
•
The sub-calls can have different priorities and
zones/zone groups, but have the same activation
behavior (e.g. momentary).
figure 43.7: Configure network controller, step 5
table 43.4: Control inputs configuration
Item
Value
Description
Input
Unique name for the control input. The input
can be enabled and disabled using the
enable checkbox.
Act on contact
Break
Make
Sets the action of the control input. See
Function
Various
Sets the action of the control input. See
Supervision
On, Off
Switches supervision of the control input on
(On
) or off (
Off
).
Actions
1..5
Selects the number of actions for this control
input if it is a
Call activation key
,
Start
or
Stop